Izdelki za adi farma omejena (5)

Composition: Precipitated silica LATSIL® 550 (S) is a precipitated silica has very high absorption capacity. It enhance the flowability and prolongs the shelf life of powdered substances which are prone the caking. When considering the use of any Latro’s products in a particular application,you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information,contact the Latro’s Sales Office nearest to you.Before handling any other products mentioned in the text,you should obtain available product safety information and take the necessary steps to ensure safety of use. LATSIL®550 (S) is available in 20 kg brick type bags. Packaging sizes can be customized according to special requirements. Appearance:White powder Loss on drying (@ 105°C 2 hrs):max. %7,0 Ignition Loss, On andhydrous basis (@ 1000°C for 2 hours):max %7,0 Bulk density,Tapped (While material packed):min. 100 g/l pH (in 5 % aqu. Suspn.):6,0 – 8,0 Oil absorption:250-300 cc/100 g DBP absorption:300-400 cc/100 g Avg. particle size, d50:15,0-20,0 micron Soluble Salts:max. %2,0 Iron Content (Fe+3):max. 200 ppm

It is a new generation facade system that offers all the necessary expansions for projects with Covered (K), Semi-Covered (V) and Silicone (S) alternatives. Unlike conventional 50 mm wide facade systems, its 60 mm size gives the system the ability to pass larger openings and make more glass area. It offers the opportunity to be used in all projects designed for different purposes with its horizontal and vertical carrier profiles at different depths. The system, which includes insulators of different sizes to achieve high thermal values, is an ideal solution for vertical facades as well as inclined surfaces and roof applications. The system allows the use of glass up to 52 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. System Visible Width:60 mm System Depth:80 – 205 mm Applicable Glass Thickness:6 – 52 mm Air Impermeability:A4 – 600 Pa / EN 12152 Water Tightness:RE750 – 750 Pa / EN 12154 Wind Load Resistance:1440 Pa / EN 13116 Thermal Insulation:(Uf) < 1.9 W/m²K

Surfeco® PS 12 is a silicone-based spreading & penetration agent that greatly reduces surface tension. It shows a great hydrolytic stability over a wide pH range (2-12). The surface tension of 0.1% Surfeco® PS 12 aqueous solution was obtained as 27 dyn / cm. It has been determined that keep stable this performance in the pH range of 2-12. Increases the uptake of active ingredients Increases the leaf coverage/ stomata flooding Promotes spray volume reduction Enhances the efficacy of fertilizers or pesticide in the field Applicable to many products thanks to wide range pH stability (2-12) It is recommended to use up to %2-5% as an IN-CAN adjuvant to pesticide or fertilizer formulations. It is recommended to decide after laboratory tests for optimum dosage and compatibility.When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. Appearance:Light yellow / light brown liquid Solid Content at 160°C:87±2 Ionic Character:Weak Cationic

SUSPERIN AC/S is a blend of magnesium sulphate and surfactants. Generally, fertilizers form agglomerates when they contain moisture and become sticky. Agglomerated fertilizer does not flow evenly which causes the problem in distribution and usage. Adding SUSPERIN AC/S to fertilizers helps to prevent caking thanks to its moisture absorption capacity. Enhance the free flow properties of powder fertilizers Provides robust, long-lasting caking control Easy to apply to powder fertilizer in a typical operation Enhance the treated fertilizer’s marketability When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Appearance:White Powder Free Moisture:0,5% max pH ( in 10% Solution):3-5 Water Soluble (MgO):30,7% min-32,5% max Magnesium (Mg):18,5 % min-19,6 max

Composition: Propriotory blend of surfactants Emulcore® EC 50 it is a blend of anionic & nonionic surfactants which is the recommended emulsifier for EC formulations. Provides a stable emulsion with technical particles and non-polar solvents Emulcore® EC 50 is O/W emulsifier used in various formulation, technical & solvents Emulcore® EC 50 is oil adjuvant emulsifier When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take the necessary steps to ensure safety of use. Up to one years from the date of manufacture for material in original unopened, properly stored containers. Appearance:Yellow to amber colour liquid Solubility:Dispersible in water pH of (5% soln.):5,5 – 7,5 Moisture content (%):Maximum 1,0 %